Billiard Cloth Protection Patch for Snooker and Pool Tables

Round /Oval Pool Snooker Spot  Stickers  come in small/large round and oval shape,with strong self-adhesion that stays secure during play.Peel off residue-free without damaging tablecloth,ideal for accurate ball placement,minor repair  and mending worn spots.Universally compatible with all standard pool/snooker tablecloths，a must-have pratcicial accessory for home,bar and  club billiard setups.

Instructions for Use

A. For New Table Cloth

1. Determine the standard ball-racking position on the new table cloth.
2. Apply the protection spot (small round, oval, or large round) directly onto the designated spot and press firmly to ensure it is flat and secure.

B. For Used Table Cloth

1. Locate the standard ball-racking position (typically where a dent or depression has formed at the break spot).
2. Fill the dent using a fine powder such as flour, chalk powder, or other similar fine materials.
3. Use a steel ruler or other flat tool to level the surface.
4. After leveling, clean away any excess powder and apply the protection spot over the position. Press firmly to ensure a smooth, flat finish.

Replacement Recommendation

Each protection spot typically lasts approximately 20 days under normal use.

Replace the spot when:

• The surface becomes dark or heavily stained.
• The fabric fibers are worn away or no longer visible.

Important Notes

1. The protection spot may be ironed using an electric iron at temperatures up to 200°C (392°F).
2. Do not wipe or clean the protection spot with a wet cloth.
3. When ironing near the edges of the spot, slightly lift the front edge of the iron to prevent the spot from peeling.
4. To achieve proper protection, the first ball in the rack must be positioned directly on the protection spot.